Swimming Pool Water Chemistry Is Important
If you own a swimming pool in the Dallas area, there are numerous benefits that can be enjoyed but it all starts with proper/balanced swimming pool water chemistry. Simply put, whether you are leisurely swimming in the pool, hosting a barbecue, or exercising, having one is a luxury in our warm climate. Between our extremely high temperatures, humidity, and wind, they can be a lot more challenging to maintain and if you don’t know what you’re doing it can be a disaster for you! A majority of swimming pool owners think brushing the interior finish and tile, skimming all the debris out, vacuuming from time to time and balancing water chemistry is enough but it takes more than that. Swimming pools should be maintained at least once a week (if not more during summer and after storms) to keep them looking great and ready to swim in. If you have a swimming pool in an area with lots of trees, skimming out the debris daily would be recommended! In short, on a weekly basis, the water tile line and interior finish of the swimming pool should be brushed to prevent calcium buildup and dirt which can cause staining. Debris should also be skimmed out of the swimming pool immediately as it can change the water chemistry and could cause excess use of chlorine or an increase in your phosphate levels.
Maintaining Proper Water Chemistry
If you want to prevent algae growth and keep your pool looking great, maintaining proper swimming pool water chemistry levels is vital. During the summertime in Dallas, algae will develop rapidly in your pool if your chlorine levels are too low or if you aren’t filtering the water long enough. That’s why checking water chemistry once a week is vital. The following is a breakdown of appropriate water chemistry:
Chlorine: 3-5ppm (summer) and 1-3ppm (winter)
pH: 7.4 – 7.8
Total Alkalinity: 80 – 120ppm
Cyanuric Acid: 30 -50ppm (check the manual if you have a salt pool)
Calcium Hardness: 200 – 400ppm (which is hard to achieve in Dallas)
Balancing your water isn’t complicated. Your water is constantly changing, year round especially with the increase in swimming. The weather, body oils, suntan oils, dirt, cosmetics, and urine affect your water chemistry. Continuous filtration and disinfecting will remove contaminants which keep the water enjoyable, but please note, it does not balance your water chemistry. A pool is considered balanced when it has proper levels of chlorine, pH, Total Alkalinity, Cyanuric Acid (CYA), and Calcium Hardness. That is why monitoring the swimming pool regularly is extremely important.
During storms which frequent the Dallas area, you will need to monitor your pool more. Skimming out debris and removing them from the skimmer as well will allow for proper filtration and prevent major changes in water chemistry. Some pool professionals will recommend turning on your filter before a storm approaches to keep the debris moving into the skimmer. But, please note you will want to make sure the skimmer is free of debris which means it should be emptied after a storm. Maintaining a pool with a lot of swimmers and our extreme heat can be challenging. That’s why Weber Pools services not only residential pools but commercial pools as well. If you should have any questions, please don’t hesitate to contact us today!