Reverse Osmosis Filtration Is The Best For Your Pool
When it comes to owning a swimming pool in the Dallas area dealing with our hard water that is loaded with calcium, magnesium, and other hardness minerals can make it a little more challenging. With that being said, Reverse Osmosis filtration is by far the best way to deal with high levels of Calcium Hardness and TDS and we want to use this blog post to showcase all the different options for you!
Reverse Osmosis (RO) might seem like a complicated system, but it’s really quite a simple water filtration process. Reverse Osmosis has been used for years to desalinate water and convert it to drinking water. Most commonly, people are familiar with the under the sink RO systems. They are extremely common but are also extremely inefficient. The reason for this is due to water pressure. Simply put, the more water pressure, the less water loss.
Reverse Osmosis is a process in which dissolved inorganic solids (such as salts) are removed from a solution (such as water). This is accomplished by water pressure pushing the water through a semi-permeable membrane. The membrane only allows the water to pass through, not the impurities or contaminates (like calcium, total dissolved solids, cyanuric acid, waterborne diseases, and salts). These contaminants are removed from the water as both of them are channeled into two separate systems. Ultimately, these contaminates go out a separate waste stream.
One of the biggest ways we can help residential and commercial swimming pool owners is with our Reverse Osmosis Filtration Trailer. This is our trailer-mounted RO system that comes to your residential or commercial swimming pool and recycles your water onsite. This prevents a drain and refill and will lower Calcium Hardness, TDS, CYA, salts, phosphates, nitrates and waterborne diseases without draining the swimming pool. In fact, since we run on high pressure we can conserve up to 85% of the existing water in the swimming pool. This water is far superior to a drain and refill and you can even drink the water that is going back into the swimming pool.
But, what happens after this process is done? Many people ask us how do we prevent hard water from getting back into the pool? Simply put, install a fill line system. The Fill Line RO System offers a compact design that allows for easy access to components and occupies a minimum footprint. Perfect for light commercial use in all industries as well as residential too. The system offers reliable longterm quality water production in a compact package. Fill Line RO Systems are available in the small to mid-range model sizes of 400, 800, 1,200, and 1,500 gallons per day (GPD) product water output.
So, why hassle with pumping the water from your pool, paying for the refill and then trying to figure out the complicated chemicals needed to rebalance your pool water, when Weber Pools can take care of it for you? In less than a day, we can filter your water and lower Calcium Hardness, Total Dissolved Solids (TDS), Cyanuric Acid (CYA), phosphates, salt, bacteria, viruses, etc. and provide you with a clean, fresh pool! Not to mention, we can also support you with RO quality water all the time with our fill line options.
If you should have any questions in regards to our RO systems, please contact us today!