Weekly Pool Service In Dallas
Winter is about to come to an end, spring is in the air, the temperatures are warming up which means it is time to start thinking about your swimming pool again and what needs to happen! If you own a residential or commercial swimming pool that means changes are in store and prepping your swimming pool for swim season is extremely important because as the water warms up changes must be made to keep it looking great and algae-free. March and spring are just around the corner and it is officially time to get your pool ready! With spring we can say goodbye to cold weather and hello to increased temperatures and the thought of being able to start swimming again and host a backyard pool party. The biggest key at this point is having the knowledge that there is more maintenance that is required when the pool water warms up and we want this blog post to highlight all that needs to be done.
Quality Weekly Pool Service
With that said, Weber Pools, the best weekly pool service company in Dallas Ft Worth, would like to make sure your swimming pool is ready for the upcoming season. That means you can either hire a reputable company like ours to provide weekly pool service in Dallas or perform it on your own if you would prefer. We understand that when you spend a lot of your hard-earned money on a swimming pool, it’s extremely important to keep it blue, clean, and clear. Ultimately, hiring a reputable swimming pool service and repair company should be at the forefront of your mind but we know that some people might not have the budget and would prefer to do it on their own. First and foremost, your water chemistry is extremely important and we recommend using Taylor Test Kits to check for adequate amounts of chlorine, pH, Total Alkalinity (TA), Cyanuric Acid (CYA), Calcium Hardness (CH), and phosphates. Now that spring is around the corner, you must start checking chlorine, pH, CYA, and TA weekly along with brushing the tile line, the interior finish, steps, and benches. You must also empty the skimmer and pump basked regularly as well.
Most importantly, if you haven’t already, you will need to increase your levels of chlorine in the swimming pool. Typically during winter, you can get away with 1 part per million (ppm) chlorine but that won’t be enough when the water gets warmer. At this point, we recommend increasing your chlorine levels to at least 3 ppm to prevent algae growth. The other major change that will need to occur is your filter run times.
Chlorine and Filter Run Times
The following are the water chemistry we recommend for spring/summer:
Chlorine – 3 ppm
pH – 7.4 – 7.8
TA – 80 – 120 ppm
CYA – 30 – 50 ppm
To prevent possible algae growth now is the time to increase your chlorine levels along with your filtration run times. Typically, depending on the size of your swimming pool your filter run times will be between 6 – 8 hours a day in the springtime and 8 – 12 hours a day in the summertime.
In conclusion, now is the time to get your water tested and to make sure you start making changes to the way you take care of your swimming pool. This is also a good time to have your filter checked as well for the increased usage. Weber Pools provides inspections on all equipment as well as filter cleanings in preparation for the increased use. If you should have any questions or are looking to hire a company that can take the stress away from you, please contact us today!