Removing Phosphates From Swimming Pool Water!
Phosphate Removal From Swimming Pools Dallas Texas
With springtime in the air, Dallas has been known to get windy and with wind comes issues for your swimming pool. Specifically, phosphates which are a challenge and can be a nightmare in your swimming pool especially if you don’t what they are, how they affect your swimming pool’s water chemistry, and how to remove them because your everyday filter can’t do it without support. Since you can’t physically see them it can be challenging, but as their levels increase in the swimming pool the water could turn cloudy and green! This is where the problem is because even though you have adequate amounts of chlorine in the swimming pool algae can and will grow. Phosphates, “(also denoted as PO4) are known nutrients to help increase plant growth rates such as in algae.” Simply put, phosphates are food for algae and when their levels increase maintaining a blue and clear pool is extremely challenging.
Do you have a lot of trees in your backyard or struggle with lots of debris/soils in your pool? If you do, have adequate amounts of chlorine in the pool, and it’s still turning green chances are you have phosphates. That’s why at Weber Pools we recommend purchasing a phosphate test kit.
One of the biggest challenges with phosphates is in specific environments they are constantly being introduced into your swimming pool water. They can be found in vegetation, fill/tap water, lawn and garden fertilizers, soils and even in other pool chemicals that you use! With that said, phosphates can enter into your swimming pool in the following ways:
- A constant wind that blows dirt and other vegetation into the pool, which does happen in the Dallas Ft. Worth area.
- Sprinkler runs off from your lawn or landscaping/dirt gets into your pool.
- Certain chemicals that contain phosphorous to help clean your pool
How Do You Remove Phosphates From The Pool?
At Weber Pools, we recommend testing them at home and if you have lots of vegetation in your backyard you should definitely have a phosphate test kit. If your levels are high, you will need to remove them and this can be done a couple of different ways. Please keep in mind, you can also be pro-active in removing dirt, debris, and vegetation from the pool as soon as possible instead of allowing it to sit on the surface or bottom of the pool. During the windy season skimming the pool on a regular basis is highly recommended. This will definitely help in the future but to remove them you must purchase a phosphate remover. This is a more expensive chemical but it is extremely effective if used following the directions based on the number of gallons in your pool. PLEASE ONLY USE WHAT IS NECESSARY, MORE ISN’T BETTER!
Please keep in mind phosphate removers will make your pool cloudy. It is best to run your filter continuously until the cloudiness is gone and your phosphate levels are lowered. This might take several treatments. If you should have any questions, please contact us today!
Please note, The Puripool Process will also lower phosphates. If you have any questions, please contact us today!